Configuring Your Network Connection; Controlling The Network Security Features - HP Kayak XU800 Technical Notes

Configuring Your Network Connection

You need to use the PC Workstation's Setup program to change the
integrated Ethernet interface settings. To access the Setup program,
Press while the initial "Kayak" logo is displayed immediately after
restarting the PC Workstation.
The following table summarizes which network options you can set
using the Setup program. To
Network Setup Items
Enable your PC Workstation to be started (booted
and logged on) from the network.
Enable remote power-on of your PC Workstation.
From "Suspend Wakeup" mode, enable your PC
Workstation to return to full power when a
command is received by the integrated network
interface.
Determine boot device priority.
1. For full information on setting up your network, refer to the online Network Administrator's
Guide preloaded onto your PC Workstation.

Controlling the Network Security Features

The Security Features allow you to enable starting from the network if
you want the PC Workstation to start from a LAN server.
To enable starting from the network:
1 Press while the initial "Kayak" logo is displayed immediately
after restarting the PC Workstation to access the Setup program.
Use the or
2 Check that
Option ROM
1
In the Security menu, go to the Boot Devices
Security submenu (described below).
In the Power menu, enable the Integrated
Network item.
In the Power menu, enable the Network
Interface item.
In the Boot menu, select the Boot Device
Priority list item.
key to select the
Boot
is enabled on the PCI 5 (Advance PCI5).
Configuring Your Network Connection
Where to find in Setup
menu.
English 13