HP VISUALIZE fx6 Graphics Board Configuration and Troubleshooting Guide
Stereo Vision
Stereo Vision
The stereo modes cause the display to alternate between the left
and right images in successive refresh cycles (thus a 120 Hz refresh
rate will display 60 left images and 60 right images per second).
Stereo modes can be enabled in the
check
Stereo Sync Enabled
box in the
panel of Windows NT Display Properties.
Options
To view the stereo image, a suitable device is required. This must
have a VESA 1.0P compatible Stereo connector.
This device is usually a pair of liquid crystal glasses. The lenses
alternate between left-lens-transparent/right-lens-opaque and left-
lens-opaque/right-lens-transparent, at the same rate as the screen
refresh rate, so that each image is only seen by the appropriate eye.
The result is realistic depth perception.
18
English