What To Do If; Remedying Small Malfunctions Yourself - AEG Electrolux LAVAMAT LAVALOGIC 1620 User Information

What to do if...

Remedying small malfunctions yourself

If one of the following fault messages is shown in the display during
operation:
– ATTENTION (E41)/PLEASE CLOSE THE DOOR
– ATTENTION ERROR CODE (E11)/PLEASE OPEN THE TAP
– ATTENTION ERROR CODE (E21)/PLEASE CHECK THE WATER
DRAINAGE
please refer to the following table.
After you have rectified the error, press the START key.
If ATTENTION/PLEASE CALL YOUR LOCAL SERVICE FORCE together with
an error code (e.g. E..) appears in the display: Switch the appliance off
and then on again. Re-set the programme. Press the START key.
If the error code is displayed again, please contact the Service Force
and inform them of the error code and the PNC no. (see rating plate).
Problem
Washing machine does
not work.
The door cannot be
closed.
The programme does
not begin after the
START key has been
pressed.
ATTENTION(E41)/
PLEASE CLOSE THE
DOOR appears in the
display.
The washing machine
vibrates when
operating or is not
stable.
Possible cause
Mains plug not plugged in or
fuse not working.
The door is not closed
properly.
The START key has not been
pressed.
The child safety device is
engaged.
The door is not closed
properly.
The transit packaging has not
been removed.
The screw feet not correctly
adjusted.
Remedy
Connect the plug to a mains
socket. Check the fuse.
Close the door properly.
There should be an audible
click.
Press the START key.
Release the child safety
device.
Close the door properly;
there should be an audible
click. Press the START key.
Removing the transit
packaging.
Adjust the feet as described
in the installation and
connection instructions.
29