Main Memory; Video Memory - HP Kayak XA-s 02xx Handbook

HP Kayak XA-s MT Series 02xx PC Workstation

Main Memory

The PC Workstation has three DIMM slots on the system board for installing
main memory. Models are supplied with 64 MB or 128 MB of main memory.
Memory upgrades are available in single 32 MB 64 MB, 128 MB and 256 MB ECC
unbuffered or non-ECC SDRAM modules.
Memory can be upgraded to a maximum of 768 MB using multiples of
(3 x 256 MB) of unbuffered or non-ECC SDRAM memory modules. A serial
EEPROM on each DIMM contains data on the memory speed. This information
is read at each power on, and access time settings are set accordingly.

Video Memory

The graphics controller installed on the PC Workstation could be either a
Matrox Productiva G100, a Matrox Millennium G200, an Accel Galaxy AGP, an
ELSA Gloria Synergy+™ or ELSA Gloria Synergy II.
The Matrox Productiva G100 has a total of 8 MB of video memory already
supplied on the graphics controller board which cannot be upgraded.
The Matrox Millennium G200 has a 8 MB of SGRAM memory already supplied
on the graphics controller board. Memory may be upgraded to a maximum of 16
MB by installing a 8 MB SGRAM memory module of onto the board.
The Accel Galaxy AGP Graphics card has 31 MB of video memory already
supplied on the graphics controller board, which cannot be further upgraded.
This card is supported only on the Windows NT operating system. Drivers do
not exist for Windows 95 nor Windows 98 operating systems.
The ELSA Gloria Synergy+ includes 8 MB of video SGRAM memory installed on
the graphics board and cannot be upgraded.
The ELSA Gloria Synergy II includes 32 MB of video SGRAM memory installed
on the graphics board and cannot be upgraded.
8
Mini-Tower HP Kayak XA-s MT Series 02xx PC
PC Workstations Workstation 8-11