Download Print this page

Installation Instructions; Electrical Connections; Electrical Requirements - Electrolux CH 710 Instruction Book

Electrolux cooker hood instruction book
Hide thumbs

Advertisement

Table of Contents
It is dangerous to alter the specifi cations or attempt to modify this product in any way.
Technical Information
DIMENSIONS
ELECTRICAL SUPPLY:
DOUBLE INSULATED DO NOT EARTH

Electrical Requirements

Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualifi ed
electrician e.g. your local Electricity Board, or a
contractor who is on the roll of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).
Electrical Connection
Before connecting to the mains supply ensure
that the mains voltage corresponds to the
voltage on the rating plate inside the cooker
hood.

INSTALLATION INSTRUCTIONS

HEIGHT OF CANOPY:
HEIGHT OF CHIMNEY:
WIDTH OF CANOPY :
DEPTH OF CANOPY:
VOLTAGE:
POWER CONSUMPTION:
FAN MOTOR:
LAMPS : (2 x 40 W)
Note: CE Marking certifi es that this appliance complies with the requirements
laid down in EEC directive 89:336. (Electromagnetic compatibility) and
subsequent modifi cations and Low Voltage directive 72/23/E.

ELECTRICAL CONNECTIONS

(UPPER SECTION) 465 mm
(LOWER SECTION) 740 mm
This appliance is fi tted with a 3 core mains
cable and must be permanently connected to
the electricity supply via a double-pole switch
having 3mm minimum contact gap on each
pole. A Switched Fuse Connection Unit to
BS1363 Part 4, fi tted with a 3 Amp fuse, is a
recommended mains supply connection
accessory to ensure compliance with the Safety
Requirements applicable to fi xed wiring
instructions.
This appliance conforms to BS 800: 1988 and
EEC Directive No. 78 308 regarding
suppression of radio and television
interference.
11
54 mm
598 mm
520 mm
220-240 V 50Hz
230W
150W
80W

Advertisement

Table of Contents
loading

  Related Manuals for Electrolux CH 710