Zanussi ZOB 383 User Manual page 3

• Install the appliance with its back and one side close
to the higher appliance. The other side must be close
to appliance with the same height.
• The appliance cannot be positioned on a base.
• Built in ovens and built in cooking surfaces are at-
tached with special connection system. To prevent
damage to the appliance, only use an appliance with
the appliances from the same manufacturer.
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical data on the rating plate
agree with your domestic power supply.
• Information on the voltage is on the rating plate.
• Always use a correctly installed shockproof socket.
• When you connect electrical appliances to mains sock-
ets, do not let cables touch or come near the hot ap-
pliance door.
• Do not use multi-way plugs, connectors and extension
cables. There is the risk of fire.
• Do not replace or change the mains cable. Contact the
service centre.
• Make sure not to squash or cause damage to the mains
plug (if applicable) and cable behind the appliance.
• Make sure that the mains connection is accessible after
the installation.
• Do not pull the mains cable to disconnect the appli-
ance. Always pull the mains plug – if applicable.
Use
• The appliance is only for domestic use. Do not use the
appliance for commercial and industrial use.
• Only use the appliance for domestic cooking tasks.
This is to prevent physical injury to persons or prevent
damage to property.
• Do not use the appliance as a work surface or storage
surface.
• Do not put flammable products or items that are wet
with flammable products, and/or fusible objects (made
of plastic or aluminium) in, near or on the appliance.
There is the risk of explosion or fire.
• The interior of the appliance becomes hot during use.
There is the risk of burns. Use gloves when you insert
or remove the accessories or pots.
• Be careful when you remove or install the accessories
to prevent damage to the oven enamel.
• Always stay away from the appliance when you open
the door while the appliance is in operation. Hot steam
can release. There is the risk of skin burns.
• To prevent damage or discoloration to the enamel:
– do not put any objects directly on the appliance floor
and do not cover it with aluminium foil;
– do not put hot water directly into the appliance;
– do not keep moist dishes and food in the appliance
after you finish the cooking.
• Discoloration of the enamel has no effect on the per-
formance of the appliance
• Do not use this appliance if it is in contact with water.
Do not operate the appliance with wet hands.
• Do not apply pressure on the open door.
• Always close the appliance door when you cook, even
while grilling.
Care and cleaning
• Before maintenance, switch off the appliance and dis-
connect the appliance from the power supply.
• Before maintenance, make sure that the appliance is
cold. There is the risk of burns. There is the risk that
the glass panels can break.
• Keep the appliance clean at all times. A build-up of fats
or other foodstuff can result in a fire.
• Regular cleaning prevents the surface material from
deteriorating
• For your personal safety and the safety of your prop-
erty, only clean the appliance with water and a soap.
Do not use flammable products or products that can
cause corrosion.
• Do not clean the appliance with steam cleaners, high-
pressure cleaners, sharp objects, abrasive cleaning
agents, abrasive sponges and stain removers
• If you use an oven spray, follow the instructions from
the manufacturer. Do not spray anything on the heating
elements and the thermostat sensor.
• Do not clean the glass door with abrasive cleaning
agents or metal scraper. Heat resistant surface of the
inner glass can break and shatter.
• When the door glass panels are damaged they become
weak and can break. You must replace them. Contact
the service centre.
• Be careful when you remove the door from the appli-
ance. The door is heavy!
• Do not clean catalytic enamel (if applicable).
3