Installation - Zanussi ZOB 383 User Manual

Problem
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven lamp does not operate
Steam and condensation settle on the
food and in the oven cavity
The display shows "12.00"
If you cannot find a solution to the problem yourself,
contact your dealer or the service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

Warning! Refer to "Safety information" chapter.
Possible cause
The oven is not switched on
The clock is not set
The necessary settings are not set
The fuse in the fuse box is released
The oven lamp is defective
You left the dish in the oven for too
long
A power cut
The necessary data for the service centre is on the rating
plate. The rating plate is on the front frame of the oven
cavity.
50
Electrical installation
Important! The manufacturer is not responsible if you do
not obey the safety precautions from chapter "Safety".
This appliance is supplied without a main plug and a main
cable.
Applicable types of cables for Europe: H07 RN-F, H05
RN-F, H05 RRF, H05 VV-F, H05 V2V2-F (T90), H05 BB-
F
Remedy
Switch on the oven
Set the clock
Control the settings
Control the fuse. If the fuse is re-
leased more than one time, refer to a
qualified electrician.
Replace the oven lamp
Do not leave the dishes in the oven
for longer than 15-20 minutes after
the cooking process ends
Reset the clock
.........................................
.........................................
.........................................
A
B
13