Canon CANOSCAN D1230 series Service Manual page 57

CHAPTER 3
5) Remove the screw from the button PCB to remove it.
2
q Screw
w Button PCB
Note: When assembling, make sure to tie the cables for the drive motor and button PCB
together with four cable clamps, and attach the ferrite core. (See Figure 3-5 and 3-6)
3 - 8
COPYRIGHT © 2001 CANON INC. CANOSCAN D1230U/D2400U REV.0 MARCH 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
1
Figure 3-7