Manual Duplex Printing - Brother HL-4150CDN User Manual

Printing Methods

Manual duplex printing

The BR-Script printer driver for Windows
If you are using the Macintosh Printer Driver, see Manual Duplex Printing on page 58.
Manual duplex printing with the Windows
a
Choose the following settings from each drop-down list of the printer driver.
 Paper Size
You can use all the paper sizes specified for the tray you are using.
 Media Type
You can use all the media types that are specified for the tray you are using, except envelopes and
labels which have only one print side.
 Paper Source
Tray 1
 Duplex / Booklet
Duplex (Manual)
 Duplex Type in Duplex Settings...
There are four options for each orientation. (See Duplex / Booklet on page 33.)
Binding Offset in Duplex Settings

You can specify the offset for binding. (See Duplex / Booklet on page 33.)
Note
When you are using glossy paper, put only one sheet at a time in the MP tray to avoid a paper jam.
For any other settings, see Driver and Software in Chapter 2.
b
Send the print data to the machine. The machine will print all the even-numbered pages on one side of
the paper first. Then, the Windows
to print the odd-numbered pages.
Note
Before reinserting the paper, straighten it well, or you may get a paper jam. Very thin or thick paper is not
recommended.
®
does not support manual duplex printing.
®
printer driver
MP Tray Tray 2 (if available)
®
driver instructs you (with a pop-up message) to reinsert the paper
1
1
1
22