Gathering; Darning; Appliqués - Brother 885-X06 Operation Manual

USING ATTACHMENTS AND APPLICATIONS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Gathering

Stitch Name
Straight Stitch
Loosen the tension of the upper thread so
1
that the lower thread lies on the underside
of the material.
Sew a single row (or many rows) of
2
straight stitches.
Pull the lower threads to gather the
3
material.

Darning

Stitch Name Pattern
2
Straight
Stitch
Turn off the machine.
1
Place the darning plate on the needle
plate, then turn on the machine.
Either remove both the presser foot and
2
presser foot holder assembly and then
lower the presser foot lever.
Put the section you want to darn under
3
the presser foot together with fabric for
reinforcement.
39
Stitch Length
Pattern
[mm (inch)]
2
4 (3/16)
Stitch Length
Other
[mm (inch)]
Darning
Any
Plate
Turn on the machine.
4
Begin sewing by alternating between
5
gently drawing the work away from you
and pulling it toward you.
Note
● Sew while holding the fabric stretched in
order to keep the fabric held down.
Repeat this motion until the darn section
6
is filled with parallel lines of stitching.
Appliqués
Stitch Stitch Length
Pattern
Name [mm (inch)]
3
Zigzag
Stitch (1/64-1/16)
You can create an applique by cutting a different piece
of fabric into a shape and using it as a decoration.
Baste the cut design to the fabric.
1
Carefully sew around the edge of the
2
design with a zigzag stitch.
Stitch Width
[mm (inch)]
F-2
Any