Canon Satera LBP-3910 User Manual page 34

CAUTION
When loading paper, take care not to cut your hands with the edges of the
paper.
IMPORTANT
If you use paper that has been poorly cut, multiple sheets of paper may be fed at
•
once. In this case, fan the paper thoroughly, and then align the edges of the stack
on a hard, flat surface.
When custom size paper is printed from LIPS LX Printer Driver, you can load the
•
paper either in portrait or landscape orientation. However, when you are printing
custom size paper of its long edges 297.0 mm or less with <
> set to <
When you are not printing from LIPS LX Printer Driver, load the paper in portrait
orientation.
NOTE
To print letterhead paper or paper printed with a logo, load the paper in the proper
orientation according to the following instructions:
( : Feeding direction)
- When loading paper in landscape orientation, load the paper so that the printing
side is facing down as shown in the following figures.
Cassette 1
>, load the paper in landscape orientation.
Cassette 2, 3, and 4
33