When Loading Custom Size Paper (Non-Standard Size Paper) - Canon Satera LBP-3910 User Manual

When Loading Custom Size Paper (Non-Standard Size
Paper)
Perform the following procedure to load custom size paper.
IMPORTANT
You can load paper of the following custom paper sizes.
•
Cassette in Which
Cassette 1
(250-sheet universal
cassette UC-67D)
Cassette 2, Cassette 3,
Cassette 4
(500-sheet universal
cassette UC-67KD)
Cassette 2, Cassette 3,
Cassette 4
(500-sheet universal
cassette UC-67KG)
When custom size paper is loaded, specify the setting for <
•
- When the paper is loaded in landscape orientation (only when LIPS LX Printer Driver is
used): <
- When the paper is loaded in portrait orientation: <
When you change the orientation of the loaded custom size paper frequently, it is
•
convenient if you set <
the setting each time you change the size of paper to be loaded. If you specify <
however, note the following.
30
Paper Is Loaded
> as follows.
Size of Custom Paper
- When loading paper in portrait orientation: Width 210.0 to
297.0 mm; Length 210.0 to 431.8 mm
* If the paper width is 279.5 to 297.0 mm, the paper length
should be 210.0 to 420.0 mm.
- When loading paper in landscape orientation (only when LIPS
LX Printer Driver is used): Width 210.0 to 297.0 mm; Length
148.0 to 297.0 mm
- When loading paper in portrait orientation: Width 210.0 to
297.0 mm; Length 210.0 to 431.8 mm
- When loading paper in landscape orientation (only when LIPS
LX Printer Driver is used): Width 210.0 to 297.0 mm; Length
148.0 to 297.0 mm
- When loading paper in portrait orientation: Width 100.0 to
297.0 mm; Length 182.0 to 431.8 mm
- When loading paper in landscape orientation (only when LIPS
LX Printer Driver is used): Width 182.0 to 297.0 mm; Length
182.0 to 297.0 mm
>
> is set to <
>
> to < >. When <
>, you do not need to change
>,