Table of Contents
Advertisement
5
5
You can also adjust the C.WIDTH, DIMEN., and PNRM. effect
b.
(see
Setting the Audio options on page
36).
You can also adjust the H.GAIN effect (see
c.
options on page
36).
You can also adjust the C.IMG effect (see
d.
options on page
36).
Cannot be selected when the Speaker System is set to Surr.
e.
Back (see
The Speaker System setting on page
• You can choose the STEREO mode by using
f.
on the front panel.
• The audio is heard with your surround settings and you can
still use the Midnight, Loudness, Phase Control, Sound
Retriever and Tone functions.
Note
•
In modes that give 6.1 channel sound, the same signal is
heard from both surround back speakers.
Using the Advanced surround
ADV SURR
The Advanced surround feature creates a variety of surround
effects. Try different modes with various soundtracks to see
which you like.
Designed for action movies with dynamic
ACTION
soundtracks.
Designed for movies with lots of dialog.
DRAMA
Suitable for musical sources.
ENT.SHOW
ADVANCED GAME Suitable for video games.
Suitable for sports programs.
SPORTS
Gives a large concert hall-type sound
CLASSICAL
Creates a live concert sound for rock and/or
ROCK/POP
pop music.
Suitable for acoustic music sources.
UNPLUGGED
Gives multichannel sound to a stereo
EXT.STEREO
source, using all of your speakers
F.S.S.ADVANCE
(Front Stage
Setting the Audio
Surround
ADVANCE)
Setting the Audio
49).
button
STEREO
S.R AIR
ADVANCED
(Sound Retriever
SURROUND
AIR)
PHONES SURR
Using Stream Direct
Use the Stream Direct modes when you want to hear the
truest possible reproduction of a source. All unnecessary
signal processing is bypassed.
AUTO SURROUND See
DIRECT
PURE DIRECT
Allows you to create natural surround
sound effects using just the front speakers
and the subwoofer.
Use to provide a rich surround sound effect
directed to the center of where the front left
and right speakers sound projection area
converges.
Front left
Front right
speaker
speaker
Suitable for listening to the sound from a
Bluetooth wireless technology device.
The S.R AIR listening mode can only
selected when the ADAPTER input.
When listening through headphones, you
can still get the effect of overall surround
AUTO SURROUND/
AUTO/
STREAM DIRECT
DIRECT
Auto playback on page
33.
Sources are heard according to the settings
made in the Manual SP Setup (speaker
setting, channel level, speaker distance), as
well as with dual mono settings. You will
hear sources according to the number of
channels in the signal.
Phase Control, Acoustic Calibration EQ,
Sound Delay, Auto Delay, LFE Attenuate
and Center image functions are available.
Analog and PCM sources are heard without
any digital processing.
34
Listening to your system
Using the Sound Retriever
When audio data is removed during the compression
process, sound quality often suffers from an uneven sound
image. The Sound Retriever feature employs new DSP
technology that helps bring CD quality sound back to
compressed 2-channel audio by restoring sound pressure
and smoothing jagged artifacts left over after compression.
1
RECEIVER
4
SLEEP
SOURCE
7
INPUT
CLR
Press
RECEIVER
, then press
S.RETRIEVER
S.RTV (Sound Retriever) ON or OFF.
Note
•
The Sound Retriever is only applicable to 2-channel
sources.
Listening with Acoustic Calibration EQ
You can listen to sources using the Acoustic Calibration
Equalization set in
Automatically setting up for surround
sound (MCACC) on page
23. Refer to these pages for more on
Acoustic Calibration Equalization.
1
RECEIVER
SLEEP
SOURCE
4
7
INPUT
CLR
While listening to a source, press
RECEIVER
EQ
to switch the EQ (Acoustic Calibration EQ) ON or
OFF.
The MCACC indicator on the front panel lights when
Acoustic Calibration EQ is active.
•
You can't use Acoustic Calibration EQ with Stream
Direct mode and it has no effect with headphones.
2
3
DISP
5
6
CH
8
9
CH
SHIFT
0
ENTER
to switch the
2
3
DISP
5
6
CH
8
9
CH
SHIFT
0
ENTER
, then press
Advertisement
Table of Contents
