Miele W 827 Operating Instructions Manual page 45

Check drain
Check inlet
– Soak/Pre-wash
– Main wash
– Rinses
– Rinse hold
The water outlet is
blocked.
The drain hose has
been fixed too high.
The water inlet is
blocked
There is a fault.
Clean the fluff (drain) filter
and drain pump.
The maximum drain height
is 1 m.
– Open the stopcock.
– Start the programme
again.
– Press I-ON/0-OFF button
to release it.
– Turn the programme se-
lector to Finish .
– Press I-ON/0-OFF button
in.
– Re-start the programme.
– If the fault indicators oc-
cur again, contact the
Service Department.
45