Maximum Water Level; Selecting Programming Mode; Storing In Memory; Deactivating - Miele W 827 Operating Instructions Manual

Programmable functions enable the
user to introduce further features as
required. They remain stored in
memory until they are cancelled by
the user.
The water level for rinsing is automat-
ically raised to the maximum level
where rinse results are particularly
important.
It is effective for the rinses in the follow-
ing programmes:
- COTTONS
- MINIMUM IRON
- QUICK WASH
- MIXED WASH - Poly/Cottons
Before the "Maximum water level" pro-
grammable function can be selected
you must first select programming
mode.
A The machine must be switched off
and the drum door closed. The
programme selector must point to
Finish .
B Press the additional option buttons
Short and Water plus at the same
time and hold pressed in and:
C . . . switch the machine on with the
I-ON/0-OFF-button.
D Let go of all these buttons.
The indicator light Main wash flashes in
the sequence display.
To select the "Maximum water level"
programmable function: turn the
programme selector to -
Poly/Cottons
To activate "Maximum water level"
press the START button once.
The Rinses light comes on in the se-
quence display.
To store the "Maximum water level" pro-
grammable function in the memory
SWITCH the machine OFF with the
I-ON/0-OFF button.
The "Maximum water level" programma-
ble function is now stored in the ma-
chine's memory and is effective in the
programmes described above until
such time as you may wish to deacti-
vate it.
To deactivate the use of a maximum
water level in the rinses repeat the pro-
cedure given above from point A as far
as the *** shown above. Press the
START button and the Rinses indicator
light will go out. The function is now de-
activated. Store in memory by pressing
the I-ON/0-OFF button.
.
31