Exhaust Connection - GE GTDS855GDMC Installation Instructions Manual

7

EXHAUST CONNECTION

WARNING
TO REDUCE THE RISK
OF FIRE OR PERSONAL INJURY:
We recommend that you install your dryer before
installing your washer. This will permit direct access for
easier exhaust connection.
House Vent
The accumulated could create a potential fire hazard
could create a potential fire hazard.
DO NOT use a plastic vent.
DO NOT use a metal foil vent.
No roof venting.
There are multiple installation options.
Select the most appropriate method for
your installation situation.
Installation Instructions
Fire Hazard
"Connecting the Dryer to
STANDARD REAR EXHAUST
T
P
T
P
NOTE: WE STRONGLY RECOMMEND SOLID
METAL EXHAUST DUCTING. HOWEVER, IF
FLEXIBLE DUCTING IS USED IT MUST BE
UL-LISTED METAL, NOT PLASTIC.
STANDARD REAR EXHAUST
Y
NOTE: ELBOWS WILL PREVENT DUCT
KINKING AND COLLAPSING.
CONNECTING THE DRYER TO HOUSE VENT
RIGID METAL TRANSITION DUCT
UL-LISTED FLEXIBLE METAL (SEMI-RIGID) TRANSITION DUCT
7
Y
RECOMMENDE D
CONFIGURATION
TO MINIMIZE
EXHAUST
BLOCKAGE.