Electrical Connection Information; Electrical Requirements; Exhaust Information - GE GTDS855GDMC Installation Instructions Manual

ELECTRICAL CONNECTION INFORMATION

5
WARNING
TO REDUCE THE RISK OF FIRE,
ELECTRICAL SHOCK, AND PERSONAL
INJURY:
DO NOT USE AN EXTENSION CORD
OR AN ADAPTER PLUG WITH THIS
APPLIANCE.

ELECTRICAL REQUIREMENTS

This appliance must be supplied with 120V, 60Hz, and
connected to a properly grounded branch circuit, pro -
tected by a 15- or 20-amp circuit breaker or time delay
fuse. If electrical supply provided does not meet the
electrician install an approved outlet.
WARNING
Electrical Shock
Hazard
Plug into a grounded 3 prong outlet.
DO NOT remove ground prong.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to do so can result in death, fire, or electrical
shock
WARNING
THIS DRYER IS EQUIPPED WITH A
THREE-PRONG (GROUNDING) PLUG FOR
YOUR PROTECTION AGAINST SHOCK
HAZARD AND SHOULD BE PLUGGED
DIRECTLY INTO A PROPERLY GROUNDED
THREE-PRONG RECEPTACLE. DO NOT
CUT OR REMOVE THE GROUNDING
PRONG FROM THIS PLUG.
Installation Instructions
ELECTRICAL CONNECTION INFORMATION
5

EXHAUST INFORMATION

6
WARNING
IN CANADA AND THE UNITED STATES, THE
REQUIRED EXHAUST DUCT DIAMETER IS 4 in
(102mm). DO NOT USE DUCT LONGER THAN
SPECIFIED IN THE EXHAUST LENGTH TABLE.
The correct exhaust installation is YOUR
RESPONSIBILITY. Problems due to incorrect
installation are not covered by the warranty.
MAXIMUM ALLOWABLE
5
ENSURE PROPER
GROUND EXISTS
BEFORE USE
CABLE OUTLET