Using The Face Self-Timer - Canon PowerShot A3300 IS User Manual

Detecting a Face and Shooting (Smart Shutter)

Using the Face Self-Timer

The shutter will release approximately two seconds after the camera detects
a new face (p. 92). You can use this when the photographer wants to be in
the image, such as a group photo.
Changing the number of shots
After choosing
80
Choose
z
Follow Steps 1 – 2 on p. 68 to choose
then press the l button.
z
Press the qr buttons to choose
press the l button.
Compose the shot and press the
shutter button halfway.
z
Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
X
The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
X
The lamp will blink and the self-timer
sound will play.
Join the subjects and look at the
camera.
X
When the camera detects a new face, the
lamp and self-timer sound will speed up
(the lamp remains lit when the flash will
fire), and two seconds later the shutter will
release.
z
To cancel shooting with the timer after
countdown has started, press the p
button.
in Step 1, press the op buttons.
.
,
, then