Remote Control; Controls On Remote Control; Operating The Audio Processor - Alpine CDA-9831 Owner's Manual

Remote Control

1
2
3
4

Controls on Remote Control

1 Power Button
Press this button to turn the power on/off.
2 Source Button
Press this button to select the audio source.
3 -/J Button
Press this button to switch between the Play and Pause
modes for CD.
4 TILT 98 Buttons
Press this button to adjust the angle of the movable
display.
5 Band/Program Button
Radio mode: BAND Button
Press this button and the band will change.
CD/Changer mode: To switch the disc mode.
6 Volume Adjustment Buttons
To increase the volume level:
Press the L button
To decrease the volume level:
Press the K button
7 8 Button
Radio mode: Pressing this button will select, in ascending
order, stations programmed into the radio's presets as
shown below.
1 → 2 ... 6 → 1
CD Changer mode: DISC Select (UP) button
Press this button to select a disc in ascending order.
MP3/WMA mode: Folder or Playlist Select (UP) button
Press this button to select the folder or playlist.
8 g DN Button
Radio mode: SEEK (DN) Button
CD mode: Press this button to go back to the beginning of
the current track.
9 f UP Button
! 9 Button
5
6
7
8
9
!
"
" Mute Button
#
# Audio Processor Button
1
* For the operation of external audio processor, refer to the Owner's
Manual of the external audio processor you purchased.

Operating the Audio Processor

1
2
Radio mode: SEEK (UP) button
CD mode: Press this button to advance to the beginning
of the next track.
Radio mode: Pressing this button will select, in
descending order, stations programmed into the radio's
presets as shown below.
6 → 5 ... 1 → 6
CD Changer mode: DISC Select (DN) button
Press this button to select a disc in descending order.
MP3/WMA mode: Folder or Playlist Select (DN) button
Press this button to select the folder or playlist.
Press this button to lower the volume by 20 dB instantly.
Press this button again to cancel.
Each press of the button changes the audio processor
mode.
For details, refer to "Operating the Audio Processor" as
shown below.
Press the button to call the external audio processor
mode when the external audio processor is connected.*
Press A.PROC to select the mode.
Normal mode → EQ mode (Equalizer Presets) → Time
Correction mode (Recalling the Stored Time Correction) →
Crossover mode (Recalling the Stored built-in Crossover) →
Normal mode
Press 8 or 9 to select the item.
EQ mode:
Select from FLAT(OFF), ROCK, POPS, JAZZ & BLUES
(JAZZ), ELECTRICAL (ELECTRIC), HIPHOP & RAP
(HIPHOP), EASY LISTEN (EASY), COUNTRY, CLASSICAL
(CLASSIC), NEWS, USER'S EQ 1,2 (USERS 1,2).
Time Correction mode/Built-in Crossover mode:
Select from MEMORY 1 or 2.
1
31
-EN