Chapter 2 Replacing Hardware; General Information; Removing The Computer Cover - Lenovo IdeaCentre K330 Replacement Manual

Lenovo ideacentre k3 series hardware replacement guide v4.0
Hide thumbs Also See for IdeaCentre K330:
Table of Contents

Advertisement

Replacing hardware
Chapter
Attention:
Do not remove the computer cover or attempt any repair before reading the
"Important safety information" in the Safety and Warranty Guide that was
included with your computer or in the Hardware Maintenance Manual (HMM)
for the computer. To obtain copies of the Safety and Warranty Guide or
HMM, go to the Support Web site at http://consumersupport.lenovo.com.
Note: Use only parts provided by Lenovo.

General information

Pre-disassembly instructions
Before proceeding with the disassembly procedure, make sure that you do the
following:
1. Turn off the power to the system and all peripherals.
2. Unplug all power and signal cables from the computer.
3. Place the system on a flat, stable surface.

Removing the computer cover

Attention:
Turn off the computer and wait 3 to 5 minutes to let the computer cool
before removing the computer cover.
To remove the computer cover:
1. Remove any media (diskettes, CDs, or memory cards) from the drives, shut
down the computer, and turn off all attached devices.
2. Unplug all power cords from electrical outlets.
Hardware Replacement Guide
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ideacentre k3 series

Table of Contents