Storage Features; Cantilever Shelves - Electrolux E23CS78GPS Use & Care Manual

Side-by-side refrigerator

Hide thumbs

Table Of Contents

Table of Contents

CANTILEVER SHELVES

CAUTION

UTION

To avoid injury from breakage, handle tempered glass shelves carefully.

You can easily adjust shelf positions in the freezer and fresh food compartments to

suit your needs. The shelves have mounting brackets, which attach to slotted

supports at the rear of each compartment.

To change the position of a shelf:

1 Before adjusting a shelf, remove all food.

2 Lift the front edge up.

3 Pull the shelf out.

4 Replace by inserting the mounting bracket hooks into the

desired support slots.

5 Lower the shelf and lock into position.

Shelf Features

Your refrigerator includes SpillSafe

designed to catch and hold accidental spills. These shelves

slide out for easy access to food and faster cleaning.

Sliding shelves can be pulled forward as far as their built-in

stops allow. Sliding shelves cannot be separated from their

mounting brackets.

NOTE

The Cantilever Sliding Glass Shelf has spacers (side screws) on

the sides of the brackets to securely hold the shelf in place.

To relocate the shelf to a different location, the spacers must be

turned in (clockwise). To secure the shelf in a new location,

remember to turn the spacers out (counterclockwise) until they

touch the sides of the compartment.