Brady GlobalMark 2 User Manual page 82

Note: Text tab option changes affect only new text objects you create. These
settings do not affect objects provided by templates or QuickText labels.
The options are:
Units
Font
Type Size
Sets the unit of measure used for the type on your
labels as:
•
Points
•
Inches
•
mm (Millimeters)
The default setting varies by country.
Sets the default font style. Pull down the list and
select a font style. The factory-installed fonts are:
•
Arial 65 for BRC
•
Arial for BRC (default)
•
Brush Script for BRC
•
Tahoma
•
Times New Roman for BRC
Your system may offer additional fonts installed by
your organization.
Sets the default type size. Enter the size you want to
use as the default. Note that the system default size
of 24 points is based on the largest type size that
will fit on the smallest tape width (.5 inch).
Hint! If you are working exclusively with a
certain tape supply, you may find it useful
to set the Type Size default setting to one
appropriate for that tape width.
Setting Preferences
5 13
-