Brady GlobalMark 2 User Manual page 266

Code
55 Reload tape correctly.
56 Clean sensor and reload tape.
57 Replace ribbon.
58 Replace ribbon.
59 Replace ribbon.
60
61 Remove ribbon.
62 Install wider ribbon.
63 Install ribbon and close cover or,
press Continue with Current Ribbon
button.
64 Install ribbon with valid memory
cell.
65 Install ribbon with valid memory
cell.
66 Install ribbon with valid memory
cell.
67 Install ribbon with valid memory
cell.
68 Install ribbon with valid memory
cell.
80 Clear jam in shear cutter path.
81 Clear jam in tape path.
82 None.
Service required
83 None.
Service required
User Action
C
Error Messages
-
3