Log; Options During A Call - Nokia N73 User Manual

Options during a call

Many of the options that you can use during a voice call
are network services. Select
of the following options:
Decline, Swap, Hold
loudsp., or Activate handsfree
with Bluetooth connectivity is attached),
or End all calls, New
active standby. Select from the following:
Replace—to end an active call and replace it by answering
the waiting call.
Send touch tones—to send touch tone strings, for example,
a password. Enter the touch tone string or search for it in
Contacts. To enter a wait character (w) or a pause character
(p), press repeatedly. Select
Tip! You can add touch tones to the
number or

Log

To monitor the phone numbers of missed, received, and
dialed voice calls, press
Recent calls. The device registers missed and received calls
only if the network supports these functions, the device is
switched on, and within the network service area.
66
Options during a call for some
Mute or Unmute, Answer,
or Unhold, Activate handset,
(if a compatible headset
End active call
call, Conference, Transfer, and
OK to send the tone.
Phone
Touch tones fields in a contact card.
, and select Applications
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear
a register, scroll to the event, and press
Activate
Call timers
To monitor the approximate duration of your incoming
Open
and outgoing calls, press
Log> Call timers.
To set the display of the call timers while a call is active,
select Tools >
duration > Yes
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code. See "Phone and
SIM," p. 92.
Packet data
To check the amount of data sent and received during
packet data connections, press
> Log >
Log > Packet
for your packet data connections by the amount of data
sent and received.
Options
list. To clear an individual event, open
, and select Applications
Log > Options > Settings
or No.
Options
, and select
data. For example, you may be charged
> Clear recent
.
>
> Show call
> Clear
Tools >