Packet Data - Nokia 6136 User Manual

S e t t i n g s
To manage the voice commands, scroll to a phone function, and select from the
following options:
Edit or Remove — to change or deactivate the voice command of the
selected function
Remove all — to deactivate voice commands to all functions in the voice
commands list.
■ Connectivity
You can connect the phone to compatible devices, using an infrared, or a USB
data cable (CA-53) connection. You can also define the settings for EGPRS or
GPRS dial-up connections.
Infrared
You can set up the phone to send and receive data through its infrared (IR) port.
To use an IR connection, the device with which you want to establish a connection
must be IrDA compliant. You can send or receive data to or from a compatible
phone or data device (for example, a computer) through the IR port of your phone.
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with
other IR devices. This device is a Class 1 laser product.
When sending or receiving data, ensure that the IR ports of the sending and
receiving devices are pointing at each other and that there are no obstructions
between the devices.
To activate the IR port of your phone, select
Connectivity > Infrared.
To deactivate the IR connection, select
Infrared. When the phone displays
If data transfer is not started within two minutes after the activation of the IR
port, the connection is canceled and must be started again.
IR connection indicator
When is shown continuously, the IR connection is activated, and your
phone is ready to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other device, or a
connection has been lost.

Packet data

General packet radio service (GPRS) is a network service that allows mobile phones
to send and receive data over an Internet protocol (IP) based network. GPRS is a
data bearer that enables wireless access to data networks such as the Internet.
46
Menu > Settings
Menu > Settings
Deactivate infrared?, select Yes.
>
> Connectivity >