Deep Reach Tool Attachment - Bissell ReadyCleen 16W5 Series User Manual

O
perations
Cleaning with Attachments continued
10. Wrap flex hose around hose wrap.
11. empty collection tank and rinse out,
following instructions on page 10 under
"cleaning after use."
12. Return Readytools dial to "flooR
cleaning" setting.

Deep reach tool attachment

(select models only)
1. follow the instructions on page 6 for
filling the tank.
2. follow instructions 1-5 on page 8 under
"cleaning with attachments".
3. set tool on stain and press the trigger
to spray solution onto the area to be
cleaned.
4. slowly move the tool back and forth over
the soiled surface, keeping the tool in con-
tact with the carpet.
5. Release trigger and move tool slowly over
the soiled area to suction up water and
dirt.
6. continue to clean the area, working
in small sections, until no more dirt can
be removed.
7. Remove tool from hose when finished.
clean under warm water before storing
8. follow cleaning attachment instructions
on pages 8 and 9, instructions 8-12.
w w w . b i s s e l l . c o m
3.
5.
7.
8 0 0 . 2 3 7 . 7 6 9 1
9