If an additional option(s) is selected
for a programme, and / or the spin
speed is altered, the machine stores
these changes in memory at the start
of a programme.
When that particular programme is
chosen again, the display will show the
additional option(s) and / or spin speed
which have been stored for that
programme in the memory.
The washing machine is delivered with
the memory function deactivated.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
– The washing machine is switched off.
– The machine is properly closed.
– The programme selector is at Finish.
A Press the Start button and keep it
pressed in whilst carrying out steps
B to C.
B Switch the machine on with the
C Wait until the Start indicator light
comes on . . .
D . . . and then release the Start
E Turn the programme selector to the
Cottons 30°C position:
If the Soak/Pre-wash sequence
does not flash
F Press the Start button to activate or
deactivate the Memory function
G Switch the machine off with the
The setting you have selected is now
stored in memory and will remain so
until you alter it.
= the Memory func-
tion has not been
= the Memory