Download Print this page

Miele Distinction 500 Operating Instructions Manual: Re-fitting The Transit Bars

Hide thumbs


Installation and connection
To avoid the risk of injury the
holes for the transit bars must be
covered after the transit bars have
been removed.
^ Fit the covers on to the two holes.
Then plug the holes as shown with
the caps.
^ Secure the transit bars to the back of
the washing machine. Make sure that
holes b are fitted over retainers a.
The washing machine must not
be moved without the transit bars in
Store the transit bars as shown or
keep them in a safe place for future
use. They must be re-fitted if the
machine is to be moved again
(e.g.when moving house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the


Comments to this Manuals

Symbols: 0
Latest comments: