Miele W 526 Operating Manual page 60

Programmable functions
Follow steps A to G to programme
and store a setting in memory.
Before you begin, first ensure that:
– The washing machine is switched off.
– The machine is properly closed.
– The programme selector is at Finish.
A Press the Start button and keep it
pressed in whilst carrying out steps
B to C.
B Switch the machine on with the
I-On/0-Off button.
C Wait until the Start indicator light
comes on . . .
D . . . and then release the Start
button.
60
E Turn the programme selector to the
Cottons 75°C position:
A P will flash in the display alternating
with the number 1, 2, 3 or 4.
F Each subsequent press on the Start
button selects a different setting.
The number alternating with the P in the
display refers to the settings as follows:
1 = Setting 1 is selected
(increased water level in the
rinses)
2 = Setting 2 is selected
(increased water level in the main
wash and in the rinses)
3 = Setting 3 is selected
(extra rinse in the Cottons and
Minimum iron programmes)
4 = Setting 4 is selected
(increase in the water level in the
main wash and rinses and also an
extra rinse in the Cottons and
Minimum iron programmes).
G Switch the washing machine off with
the I-On/0-Off button.
The Water plus button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.