Table of Contents
Advertisement
Problem solving guide
Problems with the load size indicator
Problem
The display
indicates a load of
< 25%
even though
the drum is full.
The display
indicates a load of
25%
50%
75%
,
,
100%
when the
drum is empty
42
Possible cause
There was already
laundry in the drum
when the washing
machine was switched
on. This has
decalibrated the
sensor from the zero
setting.
The load size sensor
has been decalibrated
or
from the zero position.
Remedy
^ To recalibrate the sensor to the
zero setting:
– Remove the laundry from the
drum and leave the door
open.
– Switch off the washing
machine.
– Switch on the washing
machine.
– Press short cut button
main menu for the Cottons
programme appears.
– Press short cut button
Detergent in until the display
shows:
Zero setting OK.
Rotate the drum once. If the
display still indicates a load of
25%
50%
75%
,
,
recalibrate the sensor to zero
again (see above section).
. The
100%
or
,
Hide quick links:
Advertisement
Table of Contents
