Recording; Accessing Recorded File Information - RCA VR5235 User Manual

Accessing Recorded File Information

While in stop mode, press and hold MENU to display recorded file information
such as, date of recording, time of recording, recording mode, and recording
quality.

Recording

Recording
1. While in stop mode, press REC•PAUSE to start recording. The red recording
indicator will illuminate. Recording time will be displayed once you begin
recording.
2. To pause recording, press REC•PAUSE once. The red recording indicator will
be flashing. Press again to resume recording.
3. To stop recording, press STOP.
AVR (Automatic Voice Recording)
This feature allows the player to sense sound and to record only when you are
speaking into the microphone. When dictation stops for about three seconds,
recording will pause and then start again automatically when you resume
dictation.
1. Select AVR ON in the Setting menu. Refer to Settings section for instructions
on how to select AVR ON.
2. Press REC•PAUSE to enter AVR mode.
3. Start dictation. Recording starts automatically.
4. Press STOP to end AVR recording.
To adjust the sensitivity (Low/Middle/High) of the microphone, press - Volume +
during AVR recording.
• AVR works better for dictation applications than lecture or
conference recordings as background noise can cause some
false triggers.
• The first syllable or two may be lost when you start recording because
this 'sound' is used to turn on the AVR feature. It is a good practice to
make some 'sounds' or say a short word to activate the AVR before you
begin actual dictation.
21