Instrument Panel Brightness; Hazard Warning Button - Honda 2011 CR-V Owner's Manual

Instrument Panel Brightness

INSTRUMENT PANEL BRIGHTNESS
CONTROL KNOB
You can change the instrument panel
brightness only when the light
switch is on.
Turn the knob on the lower part of
the instrument panel to adjust the
brightness.
You will hear a beep when maximum
or minimum brightness is reached.
Instrument Panel Brightness, Hazard Warning Button
To reduce glare at night, the
instrument panel illumination dims
when you turn the light switch to
or . Turning the select/
reset knob fully to the right until you
hear a beep will cancel the reduced
brightness.

Hazard Warning Button

HAZARD WARNING BUTTON
U.S. model is shown.
Push the button between the center
vents to turn on the hazard warning
lights (four-way flashers). This
causes all four outside turn signals
and both indicators in the instrument
panel to flash. Use the hazard
warning lights if you need to park in
a dangerous area near heavy traffic,
or if your vehicle is disabled.
79