Switching The Stop+Go Function On And Off; Using The Automatic Warm-Up Function - AEG 68001KF-N Installation And Operating Instructions Manual

Switching the STOP+GO function on and off

The STOP+GO function simultaneously switches all cooking zones that
are switched on to the keep warm setting and then back to the heat
setting that was previously set. This function can be used to briefly in-
terrupt and then continue the cooking process e.g. to take a telephone
call.
To switch
on
To switch
off
3
Timer functions are not stopped by STOP+GO.
3
STOP+GO locks the whole control panel except the sensor field

Using the automatic warm-up function

Step
1.
2.
3.
4.
All cooking zones are equipped with an automatic warm-up function.
The automatic warm-up function sets the cooking zone to the highest
setting for a certain period of time and then automatically switches
back to the cooking setting that was originally set.
3
If during the automatic warm up
e.g. from
3
If there is still residual heat on the cooking zone (display
matic warm up is not performed.
10
Control panel
Touch STOP+GO
Touch STOP+GO
Control panel
Setting the level
Place to one side for a moment
touch
touch in order to set the de-
sired cooking setting
Á Ã
to , the automatic warm up is adjusted.
Display
u
heat setting that was previ-
ously set (not automatic
warm up function)
Ç / p
a
a higher heat setting is selected,
Display
Ç / p
Ç / p
a
Æ ¿ u
until /
a
after 3 seconds
h
), the auto-
.