Korg X5DR AI2 Owner's Manual Page 85

Synthesis system for all digital processing.
Hide thumbs
Basic Guide
• When you are using RPN messages, be sure to send the RPN MSB (Controller #101), RPN
LSB (Controller #100), Data Entry MSB (Controller #06), then Data Entry LSB (Controller
#38) in this order. If you do not follow this sequence, the parameters will not be set correctly.
• After setting the parameter values using RPN messages, you can adjust the values using the
Data Increment (Controller #96 set to 0) and Data Decrement (Controller #97 set to 0)
messages.
• Parameter selection by means of RPN messages is memorized until the next RPN messages are
sent or you turn off the power to the X5DR. Therefore, after you have set a parameter value
using RPN and Data Entry messages, if you wish to adjust the value of the same parameter,
you need to send only the Data Entry messages.
72

Advertising

   Related Manuals for Korg X5DR AI2

Comments to this Manuals

Symbols: 0
Latest comments:
  • jr Nov 18, 2013 11:36:
    does the korgx5dr have an arpagiator in it?