About Color Codes for Letters and Numbers on the Keys:
White letters and numbers are used to select the Program/Combination numbers in Program Play mode and
Combination Play mode. Blue letters and numbers are used to edit and set up parameters in other modes.
This VOLUME knob is used to adjust the entire volume level. (That is, it simultaneously adjusts
the volume at the OUTPUT connector on the rear panel and the volume at the PHONES jack.)
2 [COMBI] button
Press this button to select the Combination Play mode. Pressing this button repeatedly will toggle
the displays for Timbres 1–4 and Timbres 5–8.
3 [PROG] button
Press this button to select the Program Play mode.
4 [BANK]/[PAGE+] button, [PAGE–] button
Repeatedly pressing the [BANK] button in Program Play mode will toggle between Bank A and
Pressing this button in Program Edit mode, Combination Edit mode, Multi mode, or Global mode
will change the page shown on the LCD. Press the [PAGE+] button to select the next page; press
the [PAGE–] button to select the previous page.
5 [+10]/[®] button, [–10]/[ ] button
The [+10] and [–10] buttons increment and decrement the Program and Combination numbers in
steps of 10 in Program Play mode and Combination Play mode.
In Program Edit mode, Combination Edit mode, Multi mode, and Global mode, the [®] and [ ]
buttons allow you to move the ﬂashing cursor around the LCD to select parameters. When one
display page includes multiple LCD screens, you can switch screens by moving the cursor.
[BANK]/[PAGE+] button, [PAGE–] button
[+10]/[¤] button, [–10]/[ˆ] button
[+1]/[ £] button, [–1]/[ ¥] button