Combination Edit Mode; Basic Operation In Combination Edit Mode - Korg X5DR AI2 SYNTHESIS MODULE Owner's Manual

Basic Guide
VSw (Velocity Switch)
Timbres can be set to respond to a specific key velocity (how firmly you strike the keys).
For example, you can set Timbres in such a way that a strings sound is produced when you
play the keyboard softly, and a brass sound is produced when you play the keyboard hard.
Layer
Split
VSw
The examples here are all based on the use of two Programs. Since the X5DR allows you to use
up to eight Timbres, you can combine these types to create more sophisticated settings.

Combination Edit mode

Combination Edit mode allows you to modify the sound of Combinations. You can change the
Programs assigned to the Timbres and edit the voicing range of each Timbre.

Basic operation in Combination Edit mode

Press the [EDIT] button while in Combination Play mode to enter Combination Edit mode.
COMBI PROG BANK
PAGE+
EDIT GLOBAL PAGE-
MULTI
Press the [EDIT] button in Combination Play mode.
In Combination Edit mode, use the [PAGE+] and [PAGE–] buttons to switch the pages; use the
[®] and [ ] buttons to move the cursor (flashing line) and select a parameter; and use the [ ] and
[ ] buttons to set the value.
COMBI PROG BANK
PAGE+
EDIT GLOBAL PAGE-
MULTI
Refer to " Editing Combinations" (page 51) for information on how to edit Combinations, and
refer to "2. COMBINATION Parameters" (page 100) for information on the parameter functions.
26
Program B
Program A
Program A
Program B
Program A
+10 +1
00A PROGRAM 1-4ø
A10 A51 OFF OFF
-10 -1
Use the [PAGE+] and [PAGE–] buttons to select a page.
Use the [ˆ] and [¤] buttons to move the cursor (flashing line) and
select a parameter.
+10 +1
Use the [ ] and [ ] buttons to set the value.
-10 -1
Multiple Programs are
overlapped.
Program B
A different Program will sound
according to a specific range
(key position).
Key touch
A different Program will sound
according to how hard you
strike the keys.