Korg X5DR AI2 Owner's Manual Page 117

Synthesis system for all digital processing.
Hide thumbs
Reference Guide
6A–6D MIDI Filter
These parameters allow you to control how the X5 will handle MIDI data.
Timbres 1–8
06A PROG CHANGEø
E E D D E E E E
LCD
6A
Timbre 1~8 Program Change Filter
6B
Timbre 1~8 Damper Pedal Filter
6C
Timbre 1~8 After Touch Filter
6D
Timbre 1~8 Control Change Filter
6A
Program Change Filter: These parameters determine how EXT mode Timbres work with MIDI
Program Change messages.
Enable: With this setting, received Program Change messages select Programs for a Timbre.
Use 2C MIDI FILTER PRG in Global mode to set the global X5DR Program Change filter. (see
2C Program Change Filter on page 152.)
Note: If the Global mode 2C MIDI Program Change Filter1 is set to DIS ("2C MIDI FILTER
PRG" on page 152), Program Change messages are completely disabled. This setting overrides
the above settings. Furthermore, if the channel that matches Global mode MIDI Program Change
Filter1 is set to ENA, Program Change messages received on the Global MIDI Channel will
select Combinations. With the PRG setting, Combinations are not changed. Only the Programs
that have Timbres with the same channel settings are changed.
6B
Damper Pedal Filter: These parameters determine how Timbres respond to damper pedal
message.
Enable: With this setting, Timbres respond to damper pedal messages.
Disable: With this setting, damper pedal messages are ignored.
6C
After Touch Filter: These parameters determine how Timbres respond to After Touch messages.
Enable: With this setting, Timbres respond to After Touch messages.
Disable: With this setting, After Touch message is ignored.
6D
Control Change Filter: These parameters determine whether Timbres respond to MIDI
Controllers.
Enable: With this setting, Timbres respond to controllers.
Disable: With this setting, controllers are ignored.
104
Timbres 1–8
06B DAMPER
E E E E E E E E
6A
6B
Parameter
Timbres 1–8
ø
06C AFTER TOUCHø
06D CONTROL CHG
E E E E E E E E
E E E E E E E E
6C
Range
D: Disable
Program Change messages ignored
E: Enable
Program Change messages can be received and sent
D: Disable
Timbre will ignore the damper pedal
E: Enable
Timbre will respond to the damper pedal
D: Disable
Timbre will ignore After Touch
E: Enable
Timbre will respond to After Touch
D: Disable
Timbre will ignore controllers
E: Enable
Timbre will respond to controllers
Timbres 1–8
ø
6D
Description

Advertising

   Related Manuals for Korg X5DR AI2

Comments to this Manuals

Symbols: 0
Latest comments:
  • jr Nov 18, 2013 11:36:
    does the korgx5dr have an arpagiator in it?