Channel Control; Configuring The Channel Menu; Managing Channels - Samsung LN32B540 - 32'' LCD HDTV User Manual

CHANNEL CONTROL

Configuring the Channel Menu
¦
Antenna → Air / Cable
❑
Before your television can begin memorizing the available channels, you must specify the type
of signal source that is connected to the TV (i.e. an Air or a Cable system).
Press the TOOLS button to display the Tools menu. You can also set the Antenna by
T
selecting Tools → Switch to Cable (or Switch to Air).
Auto Program
❑
Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna

signals
When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC
N
identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in
your particular area. At this point the signal source has been selected.
After all the available channels are stored, it starts to remove scrambled channels (Clear Scrambled Channels). The Auto
N
program menu then reappears.
If you want to stop Auto Programming, press the ENTERE button. The Stop Auto Program? message will be displayed.
N
Select Yes by pressing the ◄ or ► button, then press the ENTERE button.
Clear Scrambled Channels (digital channels only)
❑
This function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20~30
minutes.
To stop searching scrambled channels: Press the ENTERE button to select Stop. Press the ◄ button to select Yes, then
N
press the ENTERE button.
This function is only available in Cable mode.
N
Channel List
❑
For detailed procedures on using the Channel List, refer to the 'Managing Channels' instructions.
You can select these options by simply pressing the CH LIST button on the remote control.
O
Fine Tune (analog channels only)
❑
Use fine tuning to manually adjust a particular channel for optimal reception.
If you do not store the fine-tuned channel in memory, adjustments are not saved.
N
* will appear next to the name of fine-tuned channels.
N
To reset the fine tuning setting, press the ▼ button to select Reset, then press the ENTERE button.
N

Managing Channels

¦
Using this menu, you can add / delete or set favorite channels and use the program guide for
digital broadcasts.
All Channels

Shows all currently available channels.
Added Channels

Shows all added channels.
Favorite

Shows all favorite channels.
To select the favorite channels you have set up, press the FAV.CH button on the remote control.
O
English - 16
Antenna : Air ►
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3 Alice's Adventures in Wonderland
Air
Zoom Select Tools
T