Dtv Connection; Digital Audio Output - Haier HL26S-A Owner's Manual

External Equipment Connections

DTV connection

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do
receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,
1080i).
How to connect
Use the TV`s COMPONENT , PC or HDMI/DVI
jack for video connections, depending on
your set-top box connector. Then, make
the corresponding audio connections.
How to use
1. Turn on the digital set-top box. (Refer to the
owner`s manual for the digital set-top box.)
2. Use INPUT on the remote control to select
COMPONENT , PC or HDMI/DVI source.
Signal COMPONENT
480i
Yes
480p Yes
720p Yes
1080i Yes

Digital Audio Output

Send the TV`s audio to external audio equipment (stereo system) via
the Digital Audio Output (Optical) port.
How to connect
1. Connect one end of an optical cable to the TV Digital Audio
(Optical) Output port.
2. Connect the other end of the optical cable to the digital audio (optical)
input on the audio equipment.
See the external audio equipment instruction manual for operation.
Note
When connecting with external audio equipments, such as amplifers or
speakers, please turn the TV speakers off.
Caution: Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
12 TV LCD-TFT
HDMI/DVI
Yes
Yes
Yes
Yes
Y
HDMI/DVI IN 2 PC IN
Y
HDMI
Digital Set-top Box
COMPONENT IN
VIDEO L AUDIO
Pb L
Pr
PC/DVI
AUDIO IN OPTICAL
Pb Pr L
AUDIO
L
OPTICAL
L
Installation
R
R
R
R
R