Gigabyte GA-Z68X-UD3H-B3 User Manual page 11

Storage Interface Chipset:
Š
- 2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA
6Gb/s devices
- 3 x SATA 3Gb/s connectors (SATA2_2~SATA2_4) supporting up to 3 SATA
3Gb/s devices
- 1 x eSATA 3Gb/s connector on the back panel supporting up to 1 SATA
3Gb/s device
- Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system
Marvell 88SE9172 chip:
Š
- 2 x SATA 6Gb/s connectors (GSATA3_5, GSATA3_6) supporting up to 2
SATA 6Gb/s devices
- Support for SATA RAID 0 and RAID 1
USB Chipset:
Š
- Up to 12 USB 2.0/1.1 ports (4 on the back panel, 8 via the USB brackets
connected to the internal USB headers)
2 x Etron EJ168 chips:
Š
- Up to 4 USB 3.0/2.0 ports (2 on the back panel, 2 via the USB bracket
connected to the internal USB header)
IEEE 1394 VIA VT6308 chip:
Š
- Up to 2 IEEE 1394a ports (1 on the back panel, 1 via the IEEE 1394a bracket
connected to the internal IEEE 1394a header)
Internal 1 x 24-pin ATX main power connector
Š
1 x 8-pin ATX 12V power connector
Connectors
Š
4 x SATA 6Gb/s connectors
Š
3 x SATA 3Gb/s connectors
Š
1 x CPU fan header
Š
2 x system fan headers
Š
1 x power fan header
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
4 x USB 2.0/1.1 headers
Š
1 x USB 3.0/2.0 header
Š
1 x IEEE 1394a header
Š
1 x serial port header
Š
1 x Trusted Platform Module (TPM) header
Š
1 x clearing CMOS jumper
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
1 x D-Sub port
Connectors
Š
1 x DVI-D port
Š
1 x optical S/PDIF Out connector
Š
1 x HDMI port
Š
1 x DisplayPort
Š
performance of the RAID set may vary depending on the devices being connected.
- 11 - Hardware Installation