Gigabyte GA-Z68X-UD3H-B3 User Manual page 103

• Restoring the Master Drive to a Previous State (for Recovery Volume only)
When two hard drives are set to Recovery Volume in Update on Request mode, you can restore the master
drive data to the last backup state when needed. For example, in case the master drive detects a virus, you
can restore the recovery drive data to the master drive.
Step 1:
Select 4. Recovery Volume Options in the MAIN MENU of the Intel RAID Configuration Utility. On the RE-
COVERY VOLUMES OPTIONS menu, select Enable Only Recovery Disk to show the recovery drive in the
operating system. Follow the on-screen instructions to complete and exit the RAID Configuration Utility.
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1008
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
Name Level
Recovery(OnReq)
 Volume0
[hi]-select
Step 2:
Go to the Manage menu of the Intel Rapid Stor-
age Technology utility and click Recover data in
Manage Volume.
The Status item on the left of the screen dis-
plays the rebuild progress.
[ RECOVERY VOLUME OPTIONS ]
1. Enable Only Recovery Disk
2. Enable Only Master Disk
[ SELECT RECOVERY VOLUME
[ HELP ]
Capacity
111.7GB
Choose the RAID level:
RAID0: Stripes data (performance).
RAID1: Mirrors data (redundancy).
Recovery: Copies data between a master and a recovery disk. Select a Recovery volume to do the operation.
RAID10: Mirrors data and stripes the mirror.
RAID5: Stripes data and parity.
[hi]-Up/Down [SPACE]-Selects [ENTER]-Done
[ESC]-Previous Menu
- 103 -
]
Status Bootable
NeedsUpdate Yes
[ENTER]-Select
Step 3:
Click Yes to begin the data recovery.
Step 4:
After the recovery volume is completed, the Sta-
tus will display as Normal.
Appendix