Connections; Controls & Indicators; Buttons - Apogee PSX-100 Operating Manual

3. The third mode is DIGITAL COPY MODE, where the selected digital input is routed to all digital out-
puts (including AUX) as well as the D/A output. Note that this is a digital input only mode and that the analog
inputs are not routed anywhere. This mode is useful for doing multiple format conversions. In the diagram
below, the signal from an ADAT is fed to the optical input and is then format-converted and fed to all the dig-
ital outputs and the D/A converter.
Please refer to the fold-out front and rear panel illustrations provided elsewhere in this Manual.
Note that the Word Clock input also serves as the input for video sync when the optional Video Sync
Module is installed.
Please refer to the fold-out front and rear panel illustrations provided elsewhere in this Manual.

Buttons

The buttons to the left of the meters generally apply to the A/D section and main outputs (some exceptions
apply). Some of the buttons serve double-duty. These buttons activate one feature when momentarily pressed
and released and a different feature when pressed and held down for 2 seconds – see below.
PSX-100 User's Manual

Connections

Controls & Indicators
Page 14