Advanced Chipset Setup - ECS G31T-M Manual

Advanced Chipset Setup

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
DRAM Frequency
Configure DRAM Timing by SPD
VGA Share Memory
DVMT Mode Select
DVMT/FIXED Memory
High Performance Event Timer
: Move Enter : Select
F1:General Help
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
Configure DRAM Timing by SPD (Enabled)
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded
in SPD during system boot up.
VGA Share Memory (Enabled, 8MB)
This item lets you allocate a portion of the main memory for the onboard VGA
display application.
DVMT Mode Select (DVMT Mode)
This item allows you to select the DVMT operating mode.
DVMT/FIXED Memory (256MB)
When set to Fixed Mode, the graphics driver will reserve a fixed portion of the
system memory as graphics memory, according to system and graphics requirements.
High Performance Event Timer (Enabled)
This item enables or disables HPET (High Performance Event Timer) support.
Press <Esc> to return to the main menu setting page.
Advanced Chipset Setup
Auto
Enabled
Enabled, 8MB
DVMT Mode
256MB
Auto
Enabled
667 MHz
800 MHz
+/-/: Value F10: Save ESC: Exit
F9: Optimized Defaults
Using BIOS
Help Item
Options
33