Specifications - dbx DriveRack 260 User Manual

Complete equalization & loudspeaker management system
Hide thumbs Also See for DriveRack 260:
Table of Contents

Advertisement

DriveRack
Analog Inputs:
Number of Inputs:
Connectors:
Type:
Impedance:
Max input line level:
CMRR:
RTA Mic Phantom Voltage:
RTA Mic EIN:
Analog Outputs:
Number of Outputs:
Connectors:
Type:
Impedance:
Max Output Level:
Alignment Delay:
A/D Performance:
Type:
Dynamic Range:
Type IV dynamic range:
Sample Rate:
D/A Performance:
Dynamic Range:
System Performance:
Dynamic Range:
THD+N:
Frequency Response:
Interchannel Crosstalk:
Crosstalk input to output:
Power Supply:
Operating Voltage:
Power Requirements:
Physical:
Weight:
Dimensions:
®
(2) Line inputs. (1) RTA Mic input
(2) Female XLR line inputs, XLR RTA Mic input
Electronically balanced/RF filtered
> 40k Ω
+30dBu with input jumpers in +30 position (+22dBu from factory)
> 45dB
+15VDC
<-110 dBu, 22 Hz - 22 kHz, 150 ohm
(6) Line Outputs
Male XLR
Electronically balanced, RF filtered
120 ohms
+22dBu
Total of 2.7 seconds available for allocation amongst all delay modules (1.3 seconds maximum delay time)
dbx Type IV conversion system
>107 dB unweighted, >110 dB A-weighted
123 dB with transient material, A-weighted, 22kHz BW 121 dB with transient material, unweighted, 22kHz BW 115
dB typical with program material, A-weighted, 22kHz BW
48kHz
112 dB A-weighted, 110dB unweighted
110 dB unweighted, >107dB weighted,
0.002% typical at +4dBu, 1kHz, 0dB input gain
20Hz – 20kHz, +/- 0.5dB
>110dB, 120dB typical
>100dB
Domestic Model: 100-120VAC 50/60 Hz - EU Model: 220-240 VAC 56/60 Hz,
25 Watts
5.5 lbs.(2.5 kg) Shipping weight 7 lbs. (3.18 kg)
1.75" H x 5.75" D x 19" W
Appendix A
Appendix
A.3 Specifications
DriveRack® User Manual
67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents