Table of Contents
Advertisement
CARE OF STAYCLEAN SURFACES
The roofs and sides of both ovens and the main
oven back panel are coated with a Stayclean
finish. They should not be cleaned manually.
Aerosol cleaners must not be used on
Stayclean surfaces and must not come into
contact with elements or the door seal, as
this may cause damage.
During normal use the Stayclean coating will
become splashed with fats and food residues.
By running the oven without food, the Stayclean
surfaces burn off any soilage. Regular use of
the oven cleaning cycle will help to keep the
panels in good condition. See below.
THE OVEN CLEANING CYCLE -
TOP OVEN
1. Remove oven shelves and bakeware from
oven.
2. Push out the Fan Selector button.
3. Push out and turn the top oven temperature
control to 220°C and allow the oven to run for
an hour or so.
THE OVEN CLEANING CYCLE -
MAIN OVEN
1. Remove oven shelves and bakeware from
oven.
2. Push out and turn the Selector to Fan
function (
)
3. Push out and turn the main oven temperature
control to 220°C and allow the oven to run for
an hour or so.
THINGS TO NOTE
The Fan Selector neon for the top oven will
illuminate.
The control knob surround will illuminate. The
oven indicator neon will turn on and off during
use.
The Cooling Fan for the controls will operate
after a short time. It may run on after the
controls are switched off until the appliance
has cooled. See page 7 for more details on
the operation of the cooling fan.
45
Advertisement
Table of Contents
