Getting Started; Attaching The Camera Strap; Inserting And Removing The Battery (Optional Accessory) - Acer Digital camera 6.2 Mega pixel CCD User Manual

GETTING STARTED

Attaching the Camera Strap

Attach the camera strap as shown in the illustration.
Inserting and Removing the Battery (Optional
Accessory)
We highly recommend using specified rechargeable lithium-ion battery (3.7V,
650mAh) to fully demonstrate this camera's function. Charge the battery before
using the camera. Make sure that the power of the camera is off before
inserting or removing the battery.
Inserting the Battery
1. Open the battery/SD card cover.
2. Insert the battery in the correct orientation shown.
Tilt the battery lock lever in the direction of the
arrow and orient the battery so that its label is
facing to the rear side of the camera, and then
insert the battery.
3. Close the battery/SD card cover.
Removing the Battery
Open the battery/SD card cover and then release the battery lock lever.
When the battery has come out a little, slowly pull it out the rest of the way.
10-EN