Icemaker Accessory Kit - GE GTZ21GCESS Owner's Manual & Installation Instructions

About the automatic icemaker.
A newly-installed refrigerator may take 12–24 hours to begin making ice.
Feeler Arm
in the STOP
Feeler Arm in
(up) position
the ON (down)
position
Automatic Icemaker
The icemaker will produce approximately 3 to
3 lbs. of ice in a 24-hour period, depending on
1 2
the freezer compartment temperature, room
temperature, number of door openings and
other use conditions.
If the refrigerator is operated before the water
connection is made to the icemaker, move the
feeler arm to the STOP (up) position.
When the refrigerator has been connected to
the water supply, move the feeler arm to the
ON (down) position.
The icemaker will fill with water when it cools to
15°F. A newly-installed refrigerator may take 12
to 24 hours to begin making ice cubes.
Once the icemaker starts to make ice, it may
take up to 48 hours to fill the bin, depending on
the temperature settings and number of door
openings.
You will hear a buzzing sound each time the
icemaker fills with water.

Icemaker Accessory Kit

If your refrigerator did not already come
equipped with an automatic icemaker, an
icemaker accessory kit is available at extra cost.
(on some models)
Throw away the first few batches of ice to allow
the water line to clear.
Be sure nothing interferes with the sweep of the
feeler arm.
When the bin fills to the level of the feeler arm,
the icemaker will stop producing ice.
It is normal for several cubes to be joined
together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale, shrink or fuse
together.
NOTE: In homes with lower-than-average water
pressure, you may hear the icemaker cycle
multiple times when making one batch of ice.
This refrigerator will accept accessory
icemaker accessory kit IM4B.
GEAppliances.com
9