Acer H7532BD User Manual page 34

24
User Password
Set User Password •
New Password
•
Confirm Password
The password is allowed for 4-8 digit number.
Exit
Input
•
•
•
•
Set User Password
Password setting is completed.
Select you preferred security mode.
Request password only when plugging the power cord in.
•
Always request password while projector turns on.
Exit
Select Confirm
Administrator Password
The "Administrator Password" can be used in both the "Enter
Set Administrator Password
Administrator Password" and "Enter Password" dialog boxes.
New Password
Confirm Password
•
The password is allowed for 4-8 digit number.
•
Input Exit
If you forgot your administrator password, do the following to
retrieve the administrator password:
•
•
Press to setup or change the "User Password".
Press number keys to set your password on the remote control
and press "MENU" to confirm.
Press to delete character.
Enter the password when you see "Confirm Password"
displayed.
The password should be between 4 and 8 characters long.
If you select "Request password only when plugging the
power cord in.", the projector will prompt the user to enter
the password every time the power cord is plugged.
If you select "Always request password while projector turns
on.", the user has to enter the password every time when the
projector is turned on.
Press to change the "Administrator Password".
The factory default of "Administrator Password" is "1234".
An unique 6-digit "Universal Password" which is printed on
the Security Card (please check accessory in the box). This
unique password is the number which will be accepted by
projector anytime no matter what the Administrator
Password is.
If losing this security card and number, please contact with an
Acer service center.