Download Print this page
RCA PS27210BR User Manual
RCA PS27210BR User Manual

RCA PS27210BR User Manual

Connecting equipment to your rca surge protector

Advertisement

Quick Links

Power Connections (All Models)
GROUNDED
OUTLET
RECEIVER
AUDIO EQUIPMENT
Phone/Fax/Modem Connections (Some Models)
CONNECT TO DEVICE'S
TELEPHONE JACK
POWER
CORD
DEVICE
(receiver, computer, etc.)
TELEPHONE
OUT
IN
WALL JACK
Coax Cable Connections (Some Models)
CABLE/
ANTENNA
OUTLET
CONNECT TO
DEVICE'S COAX JACK
TV/VCR/CABLE DEVICE
IN
OUT
have a ground wiring problem and you should contact an electrician to properly ground the outlet. Connecting your surge
protector to an improperly grounded outlet will void all Audiovox warranties.
• In models with a power switch light, the light in the power switch lights when the unit is powered on. Your surge protector
provides maximum surge protection even if the power switch is in the off position.
• Some models have a Surge Stat™ indicator. In these models, the indicator shows the current condition of the surge pro-
tector. If the Surge Stat ™ indicator shows either Not Grounded or Exhausted, you need to take the appropriate action as
described in the first two bullets above.
User's Guide
Connecting Equipment To Your
RCA Surge Protector
1. Plug the surge protector into a grounded 3-prong outlet only.
2. Plug all connected equipment directly into the surge protector.
TV
CAUTION!
DO NOT connect to an ungrounded outlet. DO NOT use with 2-wire extension cords or adapters.
VCR
This surge protector is designed for indoor use only. Install the surge protector away from heat emit-
ting appliances such as radiators or heat registers. DO NOT install where excessive moisture is pres-
DVD
ent. DO NOT plug extension cords into the surge protector. Never install electrical or telephone wiring
during a lightning storm. DO NOT USE FOR MEDICAL OR OTHER LIFE SUPPORT EQUIPMENT
OR OTHER HIGH RISK ACTIVITIES.
If your surge protector has phone jacks, pass the phone/fax/modem connection
through the jacks on your surge protector as illustrated on the left. Most modem
damage can be prevented if you connect the Phone/Fax/Modem through the surge
protector.
1. Connect the Phone/Fax/Modem line from your wall outlet to the INPUT jack on the
surge protector.
2. Connect the phone cord (provided) into the OUTPUT jack on the surge protector.
3. Connect the other end of the phone cord to the Phone/Fax/Modem jack of the device
you want to protect.
If you are using a coax cable and your surge protector has coax jacks, pass the
connection through the protected coax jacks on your surge protector. Most TV/VCR
damage can be prevented if you connect the coax cable through the surge protector.
1. Connect the Cable/Antenna line from your source to the INPUT jack on the surge
protector.
2. Connect the coax cable (provided) from the OUTPUT jack of the surge protector to
the device you want to protect.
Indicator Lights (Some Models)
• In models with a"protected"light, the light should be on when the power switch
is turned on. If this light goes out at any time, it means your surge protector has
sacrificed itself to protect your equipment and should be replaced.
• In models with a"grounded"light, the light should be on when the power switch is
turned on. If the light does not come on when you turn on the surge protector, you

Advertisement

loading

This manual is also suitable for:

Ps28210brPswts6r