Download Print this page

Pioneer 504CMX - PDP - 50" Plasma Panel Command Reference Manual page 8

Plasma display panel rs-232c commands
Hide thumbs

Advertisement

5.5.5 List of RS-232C Commands
How to read this Table
• RS-232C adjustment validity : Indicates whether or not the RS-232C adjustment mode can be used.
• Normal validity
• Numerical direct validity
or
: Valid, No mark: Invalid
(NOTE)
values are not stored in the last memory.
Command name
AJY (232C integrator) Display
[A]
AJN
AJY
ADJUST: ON
AMN
AUDIO MUTING: OFF
AMY
AUDIO MUTING: ON
AST
AUTO SET UP
[B]
B HIGH: ∗∗∗
BHI
B LOW: ∗∗∗
BLW
BRA
BAUD RATE: #####-232C
BRAS01
BAUD RATE: 1200-232C
BRAS02
BAUD RATE: 2400-232C
BRAS03
BAUD RATE: 4800-232C
BRAS04
BAUD RATE: 9600-232C
BRAS05
BAUD RATE: 19200-232C
BRAS06
BAUD RATE: 38400-232C
BRIGHTNESS: ∗∗∗
BRT
B SIDE MASK LEVEL: ∗∗∗
BSL
[C]
CLOCK: ∗∗∗
CFR
COLOR DETAIL BLUE: ∗∗∗
CGB
COLOR DETAIL CYAN: ∗∗∗
CGC
COLOR DETAIL GREEN: ∗∗∗
CGG
COLOR DETAIL MAGENTA: ∗∗∗
CGM
COLOR DETAIL RED: ∗∗∗
CGR
COLOR DETAIL YELLOW: ∗∗∗
CGY
CLS
COLOR SYSTEM: #####
CLSS01
COLOR SYSTEM: AUTO
CLSS02
COLOR SYSTEM: NTSC
CLSS03
COLOR SYSTEM: PAL
CLSS04
COLOR SYSTEM: SECAM
CLSS05
COLOR SYSTEM: 4.43NTSC
CLSS06
COLOR SYSTEM: PAL M
CLSS07
COLOR SYSTEM: PAL N
CM1
COLOR MODE: NORMAL
CM2
COLOR MODE: STUDIO
CONTRAST: ∗∗∗
CNT
COLOR OFF: ∗∗∗∗∗∗∗∗
COF
COFS00
COLOR OFF: DISABLE
COFS01
COLOR OFF: ENABLE
COLOR: ∗∗∗
COL
PHASE: ∗∗∗
CPH
COLOR TEMP.: ∗∗∗∗∗∗∗∗
CTP
CTPS01
COLOR TEMP.: LOW
CTPS02
COLOR TEMP.: MID LOW
CTPS03
COLOR TEMP.: MIDDLE
CTPS04
COLOR TEMP.: MID HIGH
CTPS05
COLOR TEMP.: HIGH
: Indicates whether or not the normal-operation mode can be used.
: When a number (3-digit number) is attached to the end of a command, the
command can directly set that adjustment value.
Terminates the 232C integrator adjustment mode.
Starts the 232C integrator adjustment mode.
Turns OFF the audio mute.
Turns ON the audio mute.
Executes AUTO SETUP.
Adjusts B. HIGH.
Adjusts B. LOW.
Displays the current baud rate.
Sets the UART setting to 232C (1200BPS).
Sets the UART setting to 232C (2400BPS).
Sets the UART setting to 232C (4800BPS).
Sets the UART setting to 232C (9600BPS).
Sets the UART setting to 232C (19200BPS).
Sets the UART setting to 232C (38400BPS).
Adjusts the brightness.
Adjusts the BLUE side mask.
Adjusts the CLOCK (PLL frequency).
Adjusts color detail BLUE.
Adjusts color detail CIAN.
Adjusts color detail GREEN.
Adjusts color detail MAGENTA.
Adjusts color detail RED.
Adjusts color detail YELLOW.
Displays the current color system.
Sets the color system to AUTO.
Sets the color system to NTSC.
Sets the color system to PAL.
Sets the color system to SECAM.
Sets the color system to 4.43NTSC
Sets the color system to PAL M.
Sets the color system to PAL N.
Sets the color mode to NORMAL.
Sets the color mode to STUDIO.
Adjusts the CONTRAST.
Displays the current COLOR OFF setting.
Disables COLOR OFF.
Enables COLOR OFF.
Adjusts the COLOR.
Adjusts the PHASE (PLL phase).
Displays the current COLOR TEMP.
Sets the COLOR TEMP. to LOW.
Sets the COLOR TEMP. to MID LOW.
Sets the COLOR TEMP. to MIDDLE.
Sets the COLOR TEMP. to MID HIGH.
Sets the COLOR TEMP. to HIGH.
RS-232C Adjustment Mode
Remarks
RS-232C
Numerical
Normal
Adjustment
Direct
Validity
Validity
Validity
6

Advertisement

loading

  Also See for Pioneer 504CMX - PDP - 50" Plasma Panel

  Related Manuals for Pioneer 504CMX - PDP - 50" Plasma Panel

This manual is also suitable for:

Pdp-504cmx